Autosoft Journal

Online Manuscript Access


Design and implementation of an intelligent ultrasonic cleaning device



Abstract

Ultrasonic cleaners are devices that perform ultrasonic cleaning by using ultrasonic converters. Ultrasonic cleaners have been employed to clean dirty and rusty materials such as optic, jewelers, automotive and dental prosthesis sectors. Due to non-identified correctly cleaning time, cavitation erosion has been occurred at some materials, which desire for cleaning. In this study, an intelligent cleaning device that runs autonomously identified cleaning time, saves energy, and makes the cleaning process safely has been designed and implemented. An ultrasonic cleaning time has been adjusted automatically by monitoring of turbidity and conductivity values of liquid that is put in to the cleaning tank. Thus, the process cleaning has been achieved without cavitation erosion by the developed device. In addition, energy and time consumptions have been lowered by the intelligent algorithm defining the cleaning time.


Keywords


Pages

Total Pages: 9

DOI
10.31209/2018.11006161


Manuscript ViewPdf Subscription required to access this document

Obtain access this manuscript in one of the following ways


Already subscribed?

Need information on obtaining a subscription? Personal and institutional subscriptions are available.

Already an author? Have access via email address?


Published

Online Article

Cite this document


References

Athira, S., and K. Deepa. "Solar Powered Ultrasonic Cleaner." 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD) (2014): n. pag. Crossref. Web. https://doi.org/10.1109/aicera.2014.6908245

Y. Baoji, J. Yingzhan, and Z. Lin. (2011). Study on the Processing Methods of Aluminum Foil Measurement Signals for Ultrasonic Cleaning Parameters. Paper presented at the Digital Manufacturing and Automation (ICDMA), 2011 Second International Conference on. F. Fuchs. (2002). Ultrasonic cleaning: fundamental theory and application, www.blackstone-ney.com/pdfs. T_Fundamentals. pdf, 15.

K. M. C. Basa, K. P. S. Gomez, F. B. Navarro-Tantoco, A. S. Quinio, G. P. Arada, and C. B. Co. (2012). Design of a varying ultrasonic frequency amplifier. Paper presented at the TENCON 2012-2012 IEEE Region 10 Conference. https://doi.org/10.1109/TENCON.2012.6412169

S. R. Bowes and P. R. Clark. (1992). Transputer-based harmonic-elimination PWM control of inverter drives. Industry Applications, IEEE Transactions on, 28(1), 72-80. https://doi.org/10.1109/28.120214

P. Handley, and J. Boys. (1992). Practical real-time PWM modulators: an assessment. Electric Power Applications, IEE Proceedings B, 139(2), 96-102. https://doi.org/10.1049/ip-b.1992.0013

J. Holtz, W. Lotzkat, and A. M. Khambadkone. (1993). On continuous control of PWM inverters in the overmodulation range including the six-step mode. Power Electronics, IEEE Transactions on, 8(4), 546-553. https://doi.org/10.1109/63.261026

C. C. Kan, D. A. D. Genuino, K. K. P. Rivera, G. Mark Daniel, and M. D. G. de Luna. (2016) Ultrasonic cleaning of polytetrafluoroethylene membrane fouled by natural organic matter. Journal of Membrane Science 497, 450-457. https://doi.org/10.1016/j.memsci.2015.08.031

V. Lanin and V. Tomal. (2015). Ultrasonic Clearing Technology of Electronics Products. Elektronika ir Elektrotechnika, 83(3), 49-52.

T. Mason. (2016). Ultrasonic cleaning: An historical perspective. Ultrasonics Sonochemistry 29, 519-523. https://doi.org/10.1016/j.ultsonch.2015.05.004

D. D. Nguyen, H. H. Ngo, Y. S. Yoon, S. W. Chang, and H. H. A. Bui. (2016). A new approach involving a multi transducer ultrasonic system for cleaning turbine engines oil filters under practical conditions. Ultrasonics 71 256-263 https://doi.org/10.1016/j.ultras.2016.07.001

B. Niemczewski. (1980). A comparison of ultrasonic cavitation intensity in liquids. Ultrasonics, 18(3), 107-110. https://doi.org/10.1016/0041-624X(80)90021-9

B. Niemczewski. (2007). Observations of water cavitation intensity under practical ultrasonic cleaning conditions Ultrasonics Sonochemistry 14, 13-18. https://doi.org/10.1016/j.ultsonch.2005.11.009

B. Niemczewski. (2009). Influence of concentration of substances used in ultrasonic cleaning in alkaline solutions on cavitation intensity. Ultrasonics sonochemistry, 16(3), 402-407. https://doi.org/10.1016/j.ultsonch.2008.09.002

B. Niemczewski. (2014). Cavitation intensity of water under practical ultrasonic cleaning conditions. Ultrasonics sonochemistry, 21(1), 354-359. https://doi.org/10.1016/j.ultsonch.2013.07.003

B. K. Tiwari. (2015). Ultrasound: A clean, green extraction technology. TrAC Trends in Analytical Chemistry, 71, 100-109. https://doi.org/10.1016/j.trac.2015.04.013

I. Tzanakis, G. S. B. Lebon, D. G. Eskin, and K. Pericleous. (2015). Comparison of cavitation intensity in water and in molten aluminum using a high-temperature cavitometer. Journal of Physics: Conference Series, 656, 1-4. https://doi.org/10.1088/1742-6596/656/1/012120

O. Ursaru, C. Aghion, M. Lucanu, and L. Tigaeru. (2009). Pulse width Modulation Command Systems Used for the Optimization of Three Phase Inverters. Advances in Electrical and Computer Engineering, 9(1), 22-27. https://doi.org/10.4316/aece.2009.01004

B. Verhaagen T. Zanderink and D. F. Rivas. (2016). Ultrasonic cleaning of 3D printed objects and Cleaning Challenge. Devices Applied Acoustics, 103, 172-181. https://doi.org/10.1016/j.apacoust.2015.06.010

H. Xu, J. Tu, F. Niu, and P. Yang. (2016). Cavitation dose in an ultrasonic cleaner and its dependence on experimental parameters. Applied Acoustics, 101, 179-184. https://doi.org/10.1016/j.apacoust.2015.08.020

M. Yakut, A. Tangel, and C. Tangel. (2009). A microcontroller based generator design for ultrasonic cleaning machines. IU-Journal of Electrical & Electronics Engineering, 9(1), 853-860.

N. S. M. Yusof, B. Babgi, Y. Alghamdi, M. Aksu, J. Madhavan, and M. Ashokkumar. (2016). Physical and chemical effects of acoustic cavitation in selected ultrasonic cleaning applications. Ultrasonics Sonochemistry, 29, 568-576. https://doi.org/10.1016/j.ultsonch.2015.06.013

H. P. Zhang, J. Z. Sun, and X. G. Chen. (2011). Study on the Safety Design and Test Method of Ultrasonic Cleaning Device for the Motor Winding. Paper presented at the Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.383-390.7538

JOURNAL INFORMATION


ISSN PRINT: 1079-8587
ISSN ONLINE: 2326-005X
DOI PREFIX: 10.31209
10.1080/10798587 with T&F
IMPACT FACTOR: 0.652 (2017/2018)
Journal: 1995-Present

SCImago Journal & Country Rank


CONTACT INFORMATION


TSI Press
18015 Bullis Hill
San Antonio, TX 78258 USA
PH: 210 479 1022
FAX: 210 479 1048
EMAIL: tsiepress@gmail.com
WEB: http://www.wacong.org/tsi/